Remote Volume Control; Connecting An Amplifier To A Controlspace® Engineered Sound Processor; Page Input Connections - Bose FreeSpace IZA series Installations- Und Bedienungsanleitung

Installation
pro.Bose.com

Remote Volume Control

Connecting an Amplifier to a ControlSpace® Engineered Sound Processor
The balanced inputs of the IZA 2120-LZ/HZ and ZA 2120-LZA/HZA can be used to easily connect to the balanced outputs of a
ControlSpace engineered sound processor.
Figure 12. Connecting a FreeSpace amplifier to a ControlSpace ESP
MONO Input STEREO/Dual MONO Input
ControlSpace ESP Amplifier Balanced ControlSpace ESP Amplifier Balanced
Processor Input Processor Input

Page Input Connections

The PAGE INPUT is a mic/line input with a trigger contact closure. This input signal is routed to all outputs (including AUX OUT)
when the trigger is detected. This is designed for push-to-talk paging microphones and telephone paging systems. In VOX mode a
dynamic microphone is also supported. See the diagram below for input wiring configurations. Use the included 4-pin Euroblock.
Figure 13. Page Input wiring connections
RCA
XLR
Phone Plug (balanced)
Phone Plug (unbalanced)
Normally Open Switch (latching)
Installation Guide - 25