Inhaltsverzeichnis
Werbung
Connecting to other devices
Recording from the unit to another device
(dubbing):
1
Connect as shown below.
Audio cable with resistor (not supplied)
Monaural mini plug
Stereo mini plug
Monaural mini plug
Monaural mini plug
Insert all
the way in.
Plug type:
ø 3.5 mm monaural
mini plug
Record.
2
1 Start recording on the recording device.
2 On the unit, play the file you want to dub.
( ➜ page 10)
●
Also read the operating instructions for the
device to be connected.
●
Select the connection cable to use in accordance with
whether the device to be connected is monaural or
stereo. If the wrong cable is used in combination with
the unit, recording may not be able to be performed
properly. For example, only 1 channel may be recorded.
●
The sound quality after dubbing may differ from the
sound quality before dubbing.
●
To record at a suitable volume, adjust the volume on the unit.
Recording from another device to the unit:
1
Stereo device
Stereo device
Monaural device
Monaural device
Recording device
Headphone jack of
a portable device,
component stereo,
etc.
2
●
Also read the operating instructions for the
device to be connected.
●
If the loudness of the sound source is too low or
high, adjust the microphone sensitivity ( ➜ page 12).
Alternatively, adjust the volume of the other device.
●
If a stereo type cable is used, the R channel is not
recorded.
Connect as shown below.
Audio cable with resistor (not supplied)
Stereo mini plug
Monaural mini plug
Plug type:
ø 3.5 mm monaural
mini plug
Record.
1 Start recording on the unit. ( ➜ page 9)
2 Start playback on the external device.
Monaural mini plug
Monaural mini plug
Insert all
the way in.
ENGLISH
19
19
Werbung
Inhaltsverzeichnis
