Wiring - Invacare Scanbed 750 Bedienungsanleitung

7. Wiring

The wires are mounted from the bottom and through the case of the shaft end of the motor.
Guide the wires under the lamellas.
Mount the wires through the cable bow and further to the control unit.
These photos show a bed with 2 motors for the mattress support.
Control the wiring by operating all the motors of the bed to their outer positions.
When all wires have been correctly mounted, there is no squeezing risk of the wires.
It is normal that the wires after short usage loosen a bit.
17