Airwell IU-MINV-HW-12H Bedienungsanleitung Seite 19

NOTE
To cancel a timer program
3. How to set the ON time
NOTE
OI-757-19EG
Setting the Timer (continued)
• The timer can be programmed while the unit is operating or while it is
stopped.
• A timer program is canceled after the timer has operated. So the
timer should be set every time programming operation is to be
performed.
• The airflow direction, fan speed and temperature setting can be
changed after a timer program has been set even when the unit is
stopped. Even when operation is stopped during an ON timer
program, the unit will start operating when the set time is reached
provided that the program is not canceled.
• As a safeguard to prevent you forgetting to turn off the air
conditioner, the unit's operation will be stopped if the remote control
unit has not been operated for at least 25 hours after the ON timer
starts.
• When the ON timer is used, the temperature setting may not be
reached by the set time depending on the size and conditions in the
room.
• Press the CANCEL button.
• When either an ON or OFF timer is to be canceled, press the button
corresponding to the timer whose program is to be canceled, and
then press the CANCEL button.
(Example) To start operation at 7:10 am.
Operation
1. Press the ON TIME setting
button once.
2. Press the Advance, Return ( , )
button until AM 7:10 is
displayed.
3. Press the SET button.
ON timer (comfort programming)
The unit starts operating automatically to attempt to change the
temperature to the desired level by the set time. (The unit operates at the
low fan speed from up to 60 minutes prior to the set time.)
OFF timer
The unit stops operating at the set time.
Indication
The timer indication blinks
and present ON time is shown.
The time can be set in 10-minute
increments. Holding down the
button advances the time rapidly
in 10-minute increments.
The timer indication stops
blinking and the present time is
displayed.
19