Safety Information; Package Contents; Installation; Introduction - VWR Powerpette Plus Bedienungsanleitung

POWERPETTE PLUS

Safety Information

The Powerpette Plus has been designed with safety in mind. They are lightweight and balance safely
in the hand. The triggers have been carefully designed to eliminate pressure points and control of
intake and delivery is therefore made easier.
It is recommended when using deleterious liquids that the user wears protective clothing including
goggles and gloves. If in doubt ask your safety officer. Please consult and establish appropriate health
and safety practices applicable to the liquid being dispensed within your working environment.

Package Contents

The Powerpette Plus kit comprises:
Powerpette Plus pipette controller
•
Charger
•
Two spare hydrophobic filters, 1x 0.45 µm and 1x 0.20 µm
•
Bench stand
•
Instruction manual
•

Installation

Introduction

The Powerpette Plus has been carefully designed and manufactured as a lightweight, cordless
pipetting aid for use with all plastic or glass pipettes from 1–100 ml.
This Powerpette Plus is constructed in recyclable materials and operates on two rechargeable, long
life, environmentally friendly 1.2V nickel metal hydride batteries. Powerpette Plus has uniquely
formed finger triggers to minimize any high pressure points. These triggers also control intake and
dispensing speeds.
A battery warning light (4) is triggered whenever the charge in the batteries is low and they should
then be recharged. Pipetting with Powerpette Plus can also take place while the units are connected
to their chargers (5).
Powerpette Plus has a conveniently located slide switch (3) which allows the user to select between
three modes of operation:
Slide switch position 'High' (top)
Slide switch position 'Low' (middle)
Slide switch position 'G' (bottom)
4
|
VWR INSTRUCTION MANUAL
Suction and dispense at full speed (Blow-out)
Suction and dispense at reduced speed (Blow-out)
Suction at reduced speed, dispense by gravity (To Deliver)
|
EN