Sony PXW-X200 Bedienungsanleitung Seite 13

Note
"Auto (5GHz)" may not be displayed depending on the wireless LAN module used.
Not displayed if the module is for the country/region where outdoor use in the 5GHz band is prohibited. Make sure that
the wireless LAN module is supported in the country/region of use. For details, refer to the operating instructions of the
wireless LAN module.
Attaching the wireless LAN module (CBK-WA02) to
the camcorder
1
Open the cover of the external device connector.
2
Attach the network module extension adapter (CBK-NA1E) supplied with the wireless
LAN module CBK-WA02 (sold separately) to the camcorder.
Connect the convex terminal to the external device connector on the camcorder and connect the
wireless LAN module to the concave terminal. You can attach the adaptor to the screw hole (1/4 in.)
of the accessory shoe mount.
3
Attach the wireless LAN module to the network module extension adapter.
Note
Attach/remove the wireless LAN module while the camcorder is turned off.
About power supply to the wireless microphone
attached to the Multi Interface Shoe
Power supply to the Multi Interface Shoe while using the network function has not been available. By
updating, however, power supply to the Multi Interface Shoe becomes available when the camcorder is
operated with the battery and the wireless microphone UWP-D11/D12 can be attached to use while using
the network function.
Internet
Extension adaptor
for network module
+ Wireless LAN
module
13