Sony PXW-X200 Bedienungsanleitung Seite 11

About the Web menu
About "Devices Status" in the Setting menu
When the network client mode is on, "Streaming" and "Proxy" are set to the following:
• "Network Client"
"Connected to CCM Name": Connection completed
Error display: "Destination Address Error," "Authentication Failed," "No Internet Access," "Certificate
is not yet valid"
• "Streaming"
"Running": While streaming
"Stop": While stopped
"Initializing": While preparing
• "Proxy"
"Stop": While stopped
"Disabling": Cannot record
Note
When "Certificate is not yet valid" appears, the date may be set to an invalid value. Check the date setting.
About Proxy Recording
About acquiring the positioning information (GPS)
You can record the positioned information to the proxy data via GPS.
Recording of the proxy data's still images
When proxy recording is performed, the still image of proxy data's first frame is recorded simultaneously.
Abilities using the Content Browser Mobile
application V2.0 or later
Displaying the proxy data's thumbnails
You can display the proxy data's thumbnails quickly using the first frame's still image.
Transferring the proxy data partially
When you use the Content Browser Mobile application, you can transfer the clipped partial data by
specifying the in-point and out-point from the proxy data.
Notes
• The maximum 15-frame margin is attached in front and behind the clipped point in a generated file.
• When you clip the proxy data recorded with network function software V1.32 or earlier, the data may not be taken to
the non-linear editor.
11