Sony PXW-X200 Bedienungsanleitung Seite 10

The network client mode is enabled and the camcorder is connected with the network RX station
PWS-100RX1. The transmission of live video is started by operating the network RX station PWS-
100RX1. For details, refer to the operating instructions of the network RX station PWS-100RX1.
You can assign "Setting" (On/Off) in "NW Client Mode" to an assignable button.
Notes
• When switched to the network client mode, streaming, monitoring, proxy recording, or file transferring cannot be
performed.
• When switched to the network client mode during monitoring, proxy recording, or file transferring, these
operations stop.
About the network connection status indication during the network client
mode
When "NW Client Mode" is set to "On," the connection status with CCM (Connection Control Manager
for the network RX station PWS-100RX1) is displayed.
Conditions
"NETWORK SET"
menu>"Network
Mode"
Off
Off
Other than "Off"
10
Network client mode status indication
"NETWORK SET"
menu>"NW Client
Mode"> "Setting"
Off
On
S D
Status
Indication
-
Not connected to
CCM
Connected to CCM
Connecting to
CCM
CCM connection
error
Lit
Flashing
Lit