Silvercrest KH 2218 Bedienungsanleitung Seite 9

3. Press the button UP d to return to the
24 hour modus.
Adjusting the projection duration
1. Press the MODE button y once again.
The display j indicates "PROJ T OFF".
2. Press the buttons DOWN/UP g/d to ad-
just the projection duration to between 01
and 59 minutes. In the adjustment "OFF"
the projection is permanent and can be
switched off by pressing the
PROJECTION button r once again.
Press the MODE button y once again to
close adjustment.
Timer function
1. Press the button USER|NAP i. In the dis-
play j the NAP indicator appears.
2. Using the buttons DOWN/UP g/d set the
desired time interval (a time span between
1 minute and 23:59 h is possible).
3. Press the button USER|NAP i once
again to start the Timer. In the display j
the remaining time is indicated.
4. When the time has lapsed, the Timer sig-
nal sounds for approx. 1 minute, the NAP-
Indicator blinks and the date and time are
shown again.
5. Press any button to end the alarm.
6. If you wish to end the Timer function
before the alarm, press and hold the
button USER|NAP i for one second.
Alarm function (Alarm 1 to 4)
You can programme in up to four alarm
times on your radio alarm. If a button is not
pressed within approx. 15 seconds, the ap-
pliance saves the adjustment and then leaves
the programming mode. Pressing and hold-
ing one of the buttons DOWN/UP g/d
changes the alarm time in intervals of 10
minutes.
1. Press one of the Alarm|Radio Preset but-
tons 1-4 q. In the display j the last pro-
grammed alarm time and the symbol for
the type of alarm blink (see below).
2. Press the buttons DOWN/UP g/d to
set the desired alarm time.
3. Once again press the selected
Alarm|Radio Preset button, if need be re-
peatedly, until the desired alarm function
(see tabel) is indicated in the display j.
Alarm function
Acoustic signal
Radio
Switched off
4. Press the button SNOOZE f to set the
weekdays on which you require the alarm
function: You can choose between "Work-
days" (MON, TUE, WED, THU, FRI),
"Weekend" (SAT, SUN), "Every day" and
"On a specific day" (MON, TUE, WED,
THU, FRI, SAT, SUN). Orientate yourself
on the weekday indicator at the top right
in the display:
MON:
TUE
WED
THU
FRI
SAT
SUN
5. Hold the button SNOOZE f pressed
down for 2 seconds when you want to
be woken on a specific weekday. To pro-
gramme this weekday, repeatedly press
the SNOOZE button f.
6. To return to the selection of workdays,
weekends or whole weeks, once again
hold the SNOOZE button f pressed
down for 2 seconds.
7. After approx. 15 seconds the display j
returns to time indication. The adjustment
for the alarm function is now saved and
will be shown.
- 7 -
Symbol in
the display
j
no symbol
= Monday
= Tuesday
= Wednesday
= Thursday
= Friday
= Saturday
= Sunday