Fossil SP20 Anleitung Seite 5

Chronograph
24-HOUR HAND
CHRONOGRAPH
MINUTE HAND
CHRONOGRAPH
SECOND HAND
Time and Date Setting
1. Pull crown out to position 2.
2. Rotate crown clockwise until the previous day's date is shown in date window.
3. Pull crown out to position 3.
4. Rotate crown clockwise until correct date is shown in date window.
5. Continue to rotate crown to set correct AM/PM time.
NOTE: 24-hour hand moves correspondingly with hour and minute hands. When setting time be sure to check that 24-hour
hand is set properly.
6. Return crown to position 1.
NOTE: When crown is in position 2, do not press the pushers. Otherwise the chronograph hands will move.
NOTE: Do not set the date between 9:00 PM and 1:00 AM to ensure accuracy.
Chronograph
1. Press A to start/stop the chronograph.
2. Press B to reset to zero.
Chronograph Zero Reset
1. If either of the chronograph hands is not at the zero (12:00) position, pull crown out to position 3.
2. Press A to move hands clockwise; press B to move hands counter-clockwise. Each press of A or B will move the chronograph
hands by one increment/decrement. Or press and hold A or B for fast increment/decrement.
3. When both hands are in the zero position, reset time and return crown to position 1.
NOTE: Chronograph minute hand will synchronize with chronograph second hand during chronograph zero reset.
8
A
1 2 3
B
Chronograph Stopwatch
CHRONOGRAPH 1/10
SECOND HAND
CHRONOGRAPH
MINUTE HAND
CHRONOGRAPH
SECOND HAND
Time Setting
1. Pull crown out to position 3.
2. Set time by turning the crown clockwise.
3. Push back to position 1 to start the watch.
Using the Stopwatch
1. Press A to start/stop the stopwatch.
2. Press B to control the split time and reset.
Stopwatch Hand Adjustment
1. Pull crown out to position 3.
2. Press A to reset the stopwatch 1/10 second hand to the "0" position.
3. Press B to reset the second and minute hands. The hands only move clockwise.
4. With each press of A or B, the hands move one position. They move quickly if the buttons are kept pressed.
Date Setting (On some models only)
1. Pull crown out to position 2.
2. Turn clockwise until desired date appears in window.
3. Push crown back to position 1.
A
1 2 3
B
9