Fossil SP20 Anleitung Seite 4

ENGLISH
3 Hand / 3 Hand Date
1 2
Date Setting
1. Pull crown out to position 2.
2. Turn crown either clockwise or counter-clockwise and set date for the previous day. The direction that moves the date varies
on different watch models.
Time Setting
1. Pull crown out to position 3.
2. Turn counter-clockwise to advance time and continue until day changes to present day.
3. Set to correct time.
4. Push crown back to position 1.
NOTE: If watch has no date function, pull crown out to position 2 for time setting.
6
DATE
1 2 3 1 2 3
DATE
Automatic
1. To start time-keeping, if watch has completely stopped, rotate crown
clockwise approximately 40 times (or until you feel resistance) in
position 1. When fully wound, the timepiece has a power reserve of
approximately 40 hours.
2. Pull crown out to position 2 and rotate clockwise or counter-clockwise
to set time after watch has been wound.
3. Return crown to position 1.
NOTE: A timepiece with an automatic winding movement obtains the
power to wind itself by the movement of your wrist, there is no battery.
Therefore, not wearing the timepiece for several consecutive days could
exhaust the power reserve. It is important your timepiece is adjusted to
match the size of your wrist. A loose fit may result in a loss in capacity of
the timepiece to wind itself.
Multifunction
Date Setting
1. Pull crown out to position 2.
2. Turn to advance date hand.
3. Push crown back to position 1.
Day and Time Setting
1. Pull crown out to position 3.
2. Turn clockwise to advance hour and minute hands.
The hand showing days of the week will also move with the hour and
minute hands. Keep turning until you have reached the desired day.
3. Push crown back to position 1.
24-Hour Sub-Dial Setting
The 24-hour hand moves correspondingly with the hour and minute hands.
When setting the time be sure to check that the 24-hour hand is set properly.
1 2
24-HOUR
SECONDS
DAY
1 2 3
24-HOUR DATE
DATE
DAY
7