Programming The Roldeck Control With S-Switch; Roldeck Control - STARLINE ROLDECK Anleitung

5 Programmation de la commande Roldeck avec le S-Switch

5.1 Roldeck Control

Programming of the Roldeck control occurs
with the help of the S-switch control panel.
• Activez d'abord la commande au moyen
de l'interrupteur rouge (1) et placez le
cavalier dans le connecteur (2).
Leave the jumper connected
during use.
Il n'est pas possible de programmer le
Roldeck avec clapet de fond automatique
au moyen du s-switch !
The display shows the following picture
"programming" the Roldeck.
The running direction of the Roldeck
can be changed.
During first programming use the arrow keys
 or  to change the running direction. Press
the middle key "light symbol" shortly to save the
running direction.
132
Manuel d'utilisation Starline Roldeck
OR
RDCM V03-1015
3,15A/T
1.
KEY DIRECTION
1 sec.
2.
PROG
OPEN CLOSE