Programming The Roldeck Control With S-Switch; Roldeck Control - STARLINE ROLDECK Anleitung

5

Programming the Roldeck Control with S-Switch

5.1 Roldeck Control

Programming of the Roldeck control occurs
with the help of the S-switch control panel.
• First turn on the Roldeck Control by
means of the red button (1) and connect
the jumper of the RD2013 into socket
(2).
Leave the jumper connected
during use.
Programming the Roldeck with
automatic lid is not possible on
the S-switch!
The display shows the following picture
"programming" the Roldeck.
The running direction of the Roldeck
can be changed.
During first programming use the arrow keys
 or  to change the running direction. Press
the middle key "light symbol" shortly to save the
running direction.
102
Manual del usuario Starline Roldeck
OR
RDCM V03-1015
3,15A/T
1.
KEY DIRECTION
1 sec.
2.
PROG
OPEN CLOSE