Cleaning And Maintenance; Slats; Debris; Housing - STARLINE ROLDECK Anleitung

6

Cleaning and Maintenance

6.1 Slats

Clean the slatted cover at least twice a year with
a high-pressure cleaner and a hard brush. Algae
growth on the slats can develop itself both on
the top side and the bottom side of the Roldeck.
• The water circulation system (filter
system) must run during daytime when
solar or transparent slats are being used.
Because with these types of slats heat will
concentrate underneath the cover which
will cause the slats to wear more quickly
or even cause deforming of the slats.
• Use a high pressure cleaner carefully.
• The slats may not be exposed to
sunshine for any length of time when they
are not in contact with the water.

6.2 Debris

Remove leafs and other debris before
closing. This will prevent the cover pit from
getting too dirty.

6.3 Housing

Clean the housing with a high pressure
cleaner and a soft brush or sponge.
Manuel d'utilisation Starline Roldeck
RDCM V03-1015
141