Operation; Overview Control; Removal Of The Rdeb2013 Front Panel - STARLINE ROLDECK Anleitung

4

Operation

4.1 Overview Control

4
5
1 Roldeck control RDEB2013
2 On/Off switch
3 Key Switch
4 S-Switch
5 Remote control

4.2 Removal of the RDEB2013 front panel

REMOVAL OF THE RDEB2013 PANEL
PLEASE NOTE:
1.Before the housing is opened the equipment
must be switched off.
2. Remove the 6 screws from the front panel
of the housing.
Remove the panel of the control housing.
RE-FITTING THE PANEL
Put the panel back on the housing and tighten
the screws crosswise.
NOTE:
Make sure that the panel on the housing is
completely closed, otherwise condensation may
occur inside the housing, which may damage
the RDEB2013.
8
User manual Starline Roldeck
1
2
1.
RDCM V03-1015
3
2.