Adjusting The Screen Display And Speaker Volume; Adjusting The Backlight - Sharp LL-T17A3 Bedienungsanleitung

Adjusting the screen display and speaker volume

Adjustment the backlight (right column)
Brightness of backlight can be adjusted.
Speaker volume adjustment (p. 17)
Speaker volume can be adjusted.
COLOR MODE setting (p. 17)
Color tone can be set.
Automatic screen adjustment (p.17)
The CLOCK, PHASE, H-POS (horizontal position-
ing) and V-POS (vertical positioning) functions can
be adjusted automatically.
Manual screen adjustment (p. 18)
Fine adjustments can be made using the On
Screen Display (OSD) Menu.
Note:
- All adjustments will be saved even after turning
the power off.
Resetting all adjustment values
All adjustment values can be returned to their
original ex-factory values in one command.
1. Turn off the monitor power.
2. Press the MENU button and the
button simultaneously, and while doing this press
the power button (i.e. turn the power on).
Continue to press the button until [ALL RESET]
appears on the screen. Reset is complete when
the displayed message disappears.
Notes:
- While ALL RESET is displayed, the control
buttons are disabled.
- It is not possible to reset values when the
adjustment lock is in place. Remove the
adjustment lock before attempting to operate
control buttons.
ADJUSTMENT menu reset
Settings of items in the ADJUSTMENT Menu
(CLOCK, PHASE, H-POS, V-POS) can be returned
to their original ex-factory values.
1. Turn on the monitor power.
2. Press the MENU button and the
simultaneously. When [RESET] appears on the
screen, the reset is complete.
Adjustment lock function
By disabling the control buttons (i.e. setting the
lock) any attempted changes to adjusted values will
be voided.
1. Turn off the monitor power.
2.While pressing the MENU button, press the
power button (i.e. turn the power on).
[ADJUSTMENT LOCKED] will appear on
the screen, and the lock will be set.
Note:
- When the lock is in place, all buttons other than
the power button are disabled.
Adjustment lock release
1. Turn off the monitor power.
2.While pressing the MENU button, press the
power button (i.e. turn the power on).
[ADJUSTMENT UNLOCKED] will appear
on the screen, and the lock will be
removed.

Adjusting the backlight

1. Without the OSD Menu being displayed, push the
or the
/ MODE
2.Check that "BRIGHT" is selected.
If it is not selected, press the
and select "BRIGHT".
3. Adjust by pressing the
button (lighter).
Note:
- On Screen display for adjustment disappears
several seconds after the last operation.
button
16
button.
VOLUME 80
BRIGHT 31
SELECT ... [
button (darker) or
/ MODE]
/ MODE button