Cutter/Perforation Cutter - Weidmuller THM Plus S Bedienungsanleitung

Option
5 Option
5.1

Cutter/Perforation Cutter

The cutting/perforation blade is not included in delivery. It must be mounted to the printer during the initial
commissioning process.
5
4
3
1
Fig. 13 Mount Cutter or Perforation Cutter
1 Put snap arm (5) of the cutter with the groove (4) first into the guide on the retainer (2).
2 Push cutter (1) down into the holders (3).
3 Fold up cutter (1) so that is snaps it at both sides of the retainer (2).
40
1
2
1357590000/00/03.12