Printer States - Weidmuller THM Plus S Bedienungsanleitung

Control Panel
3.4

Printer States

State
Ready
Printing Label
Pause
Correctable error
Irrecoverable error
Critical error
Power Save Mode
Table 2 Printer States
34
Display
Ready
Printing Label
and the number of the printed
label in the print job.
Pause
and the symbol
and the type of error
and the number of labels still
to be printed, display fl ashes red.
and the type of error
and the number of labels still
to be printed, display fl ashes red.
Critical fault
and the type of error,
display fl ashes red.
Description
The printer is in the ready state
and can receive data.
The printer is currently processing
an active print job.
Data can be transmitted for a new
print job.
The new print job will start when
the previous one has fi nished.
The printing process has been
interrupted by the operator.
An error has occurred that can be
rectifi ed by the operator without
interrupting the print job.
The print job can be continued
after the error has been rectifi ed.
An error has occurred that cannot
be rectifi ed without interrupting
the print job.
An error occurs during the system
test.
Switch the printer off and then on
again at the power switch.
Call Service if the fault occurs
persistently.
If the printer is not used for a
lengthy period, it automatically
switches to power save mode.
To exit power save mode: Touch
touchscreen display.
1357590000/00/03.12