Connecting Power; Connecting Sources; Channel 1 & 2 Controls; Channel 3 Controls - Bose S1 Pro Bedienungsanleitung

System Setup

Connecting Power

Make sure the power switch is in Standby ( ).
1.
2. Plug the power cord into the connector on the S1 Pro.
3. Plug the other end of the power cord into a live electrical outlet.
4. Power on the system by turning the power switch to On ( ).

Connecting Sources

Before connecting a sound source, adjust the appropriate channel Volume control fully counterclockwise.
Channel 1 & 2 Controls
Channel 1 and 2 are for use with dynamic microphones, guitars, keyboards or other instruments.
1. Connect your sound source to the Channel input of either Channel 1 or 2.
2. Apply a ToneMatch preset by adjusting the ToneMatch switch for the appropriate channel to
microphones or
Note: ToneMatch® presets automatically optimize the sound of your microphone or instrument.
3. Adjust the Volume control clockwise—while speaking into the microphone or playing your instrument—
until the volume has reached the desired level.
4. Adjust the Treble, Bass and Reverb controls—while speaking into the microphone or playing your
instrument—until the desired effect is achieved.

Channel 3 Controls

Channel 3 is for use with Bluetooth®-capable devices and line-level audio inputs.
Bluetooth Pairing
1. Turn on the Bluetooth feature on your mobile device.
Note: The Bluetooth feature is usually found in the Settings menu.
2. Press and hold the Bluetooth Pair button for two seconds.
Note: When ready to pair,
3. Select your Bose® S1 Pro system from the device list.
Note: When the device pairs successfully,
Note: If your paired phone receives a call, any music playing will be paused and the ring will come through the
phone; no calls or notifications will come through the S1 Pro.
Aux Input
Connect a line-level sound source to the Aux input via a 3.5 mm (⅛") cable.
Note: Anything connected via the Aux input will automatically override any paired Bluetooth device.
8 • English
for other instruments.
will flash white.
will turn solid white.
for
S1 Pro System • Owner's Guide