Nibe OPT 10 Installateurhandbuch Seite 14

GB
External supply temperature sensor
Temperature sensor
External supply temperature sensor (BT63) must be
■
installed, depending on the docking, according to
the outline diagram in this manual.
Install the temperature sensors using cable ties, with
the heat conducting paste and aluminium tape. Then
insulate them with the supplied insulation tape.
NOTE
Sensor and communication cables must not
be placed near power cables.
Connect the supply temperature sensor (BT63) to any
AUX input on the input board in the main product.
SMO 40
LEK
BT63
14
AA3-X6
1
2
3
4
5
6
7
8
9
10
AA3-X6