Using Usb Power - Panasonic RR-XS410 Bedienungsanleitung

Using USB power

Power can be supplied from the computer's USB
terminal to operate this unit.
• Start the computer beforehand.
• Turn the unit off beforehand.
1
Take out the unit's USB plug.
Push and slide
until a "click"
sound is heard.
2
Press and hold [g STOP/RETURN] on
the unit while connecting the unit to the
computer's USB port.
The unit is turned on via USB power
source.
External power source indication
58
58
Storing the USB plug:
STOP
RETURN
Insert the USB plug straight in the
same direction as that of the terminal.
g Disconnecting the unit
After switching off the unit's power, disconnect the unit.
*
When using USB power, the continuous recording
time for 1 file is a maximum of 24 hours. However, if
the file size exceeds 2 GB during recording, recording
is stopped at 2 GB, and recording is then restarted as
a new file. Recording is not performed for the approx.
2 seconds between recording stopping and then
restarting.
* Do not disconnect the unit while saving the recording
data. The data or this unit may be destroyed.
* When using USB power, AUTO POWER OFF function
does not work. (➜ page 52)