PP 1050 A1
Operation and Safety Notes
Bedienungs- und Sicherheitshinweise
Notes for parents
Hinweise für die Eltern
ON / OFF
Toy drill PP 1050 A1
We congratulate you on the purchase of your new appliance. You
have chosen a high quality product. The operating instructions
are part of the product. They contain important information
concerning safety, use and disposal. Before using the product,
familiarise yourself with all the operating and safety instructions.
If you pass the product on to anyone else, please ensure that you
also pass on all the documentation with it.
ATTENTION! NOT SUITABLE FOR CHILDREN
UNDER 3 YEARS OLD: CONTAINS SMALL
PARTS WHICH MAY REPRESENT A CHOKING
HAZARD! DANGER OF SUFFOCATION!
ATTENTION! Cords / wires / polystyrene parts / foil / tapes /
clips / tags, loops, which have been used to secure the toy in
its packaging for transport, are not part of the toy and must
be removed before children are allowed to play with the toy.
Scope of delivery
1 Set of operating
Toy drill: PP 1050 A1
2 x 1.5 V
, R6, AA (Mignon) (not included in scope of delivery)
We recommend using only batteries and not accumulators.
Features and fittings / play function
This article is toy imitation of a tool with functions suitable for
1–2 gear switch: changes the rotation speed
L / R
Screw battery compartment
ON / Off switch switches the device on
Anticlockwise / clockwise: changes the direction of rotation
Selection switch; creates „rattling noises"
Bit: creates drilling noises
LED: lights up
General Safety Instructions
Check the toy regularly for signs of damage (like damage at
contacts or on the housing, leaking batteries etc.). If you
detect any damage, the toy may no longer be used.
General safety notes concerning batteries
Single use, non-rechargeable batteries must never be re-
Rechargeable batteries must always be recharged under
Rechargeable batteries must be removed from the toy be-
fore they are recharged.
Unequal batteries types or new and used batteries may not
be used together.
Batteries must be inserted in compliance with the correct
Empty batteries must be removed from the toy.
Do not allow the connection terminals to short circuit.
Removing and inserting the batteries
ATTENTION! An adult must replace the batteries.
Loosen the battery compartment screw using a screwdriver
Remove the battery compartment cover and insert the new
Ensure correct polarity. This is shown in the battery com-
Screw on the battery compartment cover.
ATTENTION! Only use the device with the battery compartment
cover screwed on.
name is Peter