HP LineJet Serie Installationsanleitungen Seite 55

6
Cabinet Model Shown
The ribbon must not be
Caution
twisted. A twisted ribbon can
lower print quality, shorten
ribbon life, or cause paper
jams.
7
Medium (3 parts)
Lower the forms thickness lever. Set it to match the paper thickness.
Do not set the forms thickness lever too tightly; too much friction can cause paper
Note
jams, ribbon jams, smeared ink, or wavy print. The A-B-C scale corresponds
approximately to 1-, 3-, and 6-part paper thickness of 20 lb paper. Adjust until you
have the desired print quality.
A
Thin (1 part)
B
C
Thick (6 parts)
Section 7: Installing the Ribbon
Squeeze the left hub latch and place the empty
spool on the left hub. Press the spool down
until the hub latch snaps into place. Turn the
empty spool by hand to make sure the ribbon
tracks correctly in the path and around the
ribbon guides.
55