HP LineJet Serie Installationsanleitungen Seite 51

Thin (1 part)
Medium (3 parts)
Thick (6 parts)
Lower the forms thickness lever. Set it to match the paper thickness. See scale above.
Do not set the forms thickness lever too tightly; too much friction can cause paper
Note
jams, ribbon jams, smeared ink, or wavy print. The A-B-C scale corresponds
approximately to 1-, 3-, and 6-part paper thickness of 20 lb paper. Adjust until you
have the desired print quality.
4
Cabinet Model
Press the SET TOF key on the control panel. The paper moves down to the print position and
aligns to the top-of-form.
The forms thickness lever must be closed; otherwise there will be no paper
Note
movement when you press SET TOF.
3
A
B
C
Section 6: Setting the Top-of-Form
Pedestal Model
51