HP LineJet Serie Installationsanleitungen Seite 27

5
Make sure the forms thickness lever is in the
fully opened position (lever is all the way up).
6
Remove the envelope that contains the sample configuration printout. Store this in your LineJet
Printers: User's Guide .
Section 3: Unpacking the Printer
The lever is all the way UP
for the fully opened
position.
The lever is all the way
DOWN for the closed
position.
Forms Thickness
Lever
The forms thickness lever cannot be moved to
the closed position (lever is down) until the
hammer bank protective foam is removed.
Envelope
27