HP LineJet Serie Installationsanleitungen Seite 41

9
Horizontal Adjustment
Knob
To avoid damage to the printer
Caution
caused by printing on the
platen, always position the
inner edge of the closed left
tractor door directly to the left
of the number "1" on the paper
scale.
Align the paper according to the paper scale
on the shuttle cover by turning the horizontal
adjustment knob until the left inner edge of the
closed left tractor door is directly to the left of
the number "1" on the paper scale. Horizontal
adjustment moves both tractors left or right.
(You can also use the paper scale to count
columns.)
Section 5: Loading the Paper
10
Set the printer power switch to | (on). The
printer initializes. This takes approximately 20
seconds.
41