Operating The Steering Casters; Strain Relief - Vermeiren 2030 Gebrauchsanweisung

Magnetic field for the
Supply frequency
3 A/m
(50/60 Hz) pursuant to
IEC 61000-4-8
NOTE V is the grid alternating voltage before applying the test level.
T
2.2

Operating the steering casters

L
WARNING:
Good operation of the steering casters is influenced by wear and
contamination of the casters (water, oil, ...) – Check the condition of the casters
before each use.
L
WARNING:
The steering casters can wear – Check the operation of the steering
casters before each use.
L
WARNING:
Danger of accidents
only one caster is braked, the bed can still move.
All casters can be locked to prevent involuntary movements.

Securing (A)
Push the surface of the tilting lever downwards by foot until it brakes the caster.

Releasing (B)
Push the surface of the tilting lever forwards by foot until the caster is released.
2.3

Strain relief

L
WARNING:
Do not remove the relief unit.
L
WARNING:
Nothing must be fitted to or hung on the relief unit.
Below the spar of the mattress support platform there is a socket for the tightening of the
relief unit.

Insert the relief unit of the power cable (4) into the suspension (3).

Pull the desired length of the power cable (1) in such a way that the power cable (2)
can be laid under the mattress support platform without sagging. Be careful to avoid
that the cable (2) come under the traction in any adjustment position.

Fasten the power cable by properly tightening the relief unit of the power cable (4).

Fasten the position of the relief unit by properly tightening the fixing screws (5).
3 A/m
-
All steering casters should always be braked. If
A
Page 9
2017-05
Magnetic fields with the grid frequency
should comply to those normal in the
commercial or hospital environments.
B
2030