Werbung
l in d a b | Wi r v ere i n fac h en B a u
Montageanleitung
NM24A-MF
Product features
Adaption and synchronisation
Accessories
Electrical accessories
Mechanical accessories
6
www.belimo.eu
Damper actuator, parameterisable, Modulating,
AC/DC 24 V, 10 Nm
An adaption can be triggered manually by pressing the "Adaption" button or with the
PC-Tool. Both mechanical end stops are detected during the adaption (entire setting
range).
Automatic synchronisation after pressing the gearbox disengagement button is
configured. The synchronisation is in the home position (0%).
The actuator then moves into the position defined by the positioning signal.
A range of settings can be adapted using the PC-Tool (see MFT-P documentation)
Description
Auxiliary switch, add-on, 1 x SPDT
Auxiliary switch, add-on, 2 x SPDT
Auxiliary switch, add-on, 2 x SPDT, grey
Feedback potentiometer 140 Ohm, add-on
Feedback potentiometer 140 Ohm, add-on, grey
Feedback potentiometer 200 Ohm, add-on
Feedback potentiometer 500 Ohm, add-on
Feedback potentiometer 500 Ohm, add-on, grey
Feedback potentiometer 1 kOhm, add-on
Feedback potentiometer 2.8 kOhm, add-on
Feedback potentiometer 2.8 kOhm, add-on, grey
Feedback potentiometer 1 kOhm, add-on, grey
Feedback potentiometer 5 kOhm, add-on
Feedback potentiometer 5 kOhm, add-on, grey
Feedback potentiometer 10 kOhm, add-on
Feedback potentiometer 10 kOhm, add-on, grey
Signal converter voltage/current, supply AC/DC 24V
Digital position indicator for front-panel mounting, 0...99%, front mass
72 x 72 mm
Range controller for wall mounting, adjustable electron. Min./max.
angle of rotation limitation
Positioner for wall mounting, range 0...100%
Positioner in a conduit box, range 0...100%
Positioner for front-panel mounting, range 0...100%
Positioner for wall mounting, range 0...100%
Connecting cable 5 m, A+B: RJ12 6/6, To ZTH/ZIP-USB-MP
Connection cable 5 m, A: RJ11 6/4, B: Free wire end, To ZTH/ZIP-
USB-MP
Description
Actuator arm, for standard spindle clamp (reversible) K-SA
Actuator arm, for one-sided spindle clamp K-ENSA
Shaft extension 250 mm, for damper spindles Ø 8...25 mm
Spindle clamp, one side for NM..A
Spindle clamp, one side for NM..A, SM..A
Straight ball joint with M8, suitable for damper crank arms KH8
Angled ball joint with M8, suitable for damper crank arms KH8
Damper crank arm, for damper spindles
Spindle clamp, reversible for NM..A and LMQ..
Angle of rotation limiter, for K-NA
Universal mounting bracket 180 mm
Form fit insert 8x8 mm, for NM..A
Form fit insert 10x10 mm, for NM..A / SM..A
Form fit insert 12x12 mm, for NM..A / SM..A
Form fit insert 15x15 mm
Form fit insert 16x16 mm, for NM..A / SM..A
Mounting kit for linkage operation, NM..A for flat installation
Änderungen vorbehalten
NM24A-MF • en-gb • 2015-09-30 • subject to changes
2018-01-30
RCW-1/RCWB-1
Type
S1A
S2A
S2A GR
P140A
P140A GR
P200A
P500A
P500A GR
P1000A
P2800A
P2800A GR
P1000A GR
P5000A
P5000A GR
P10000A
P10000A GR
Z-UIC
ZAD24
SBG24
SGA24
SGE24
SGF24
CRP24-B1
ZK1-GEN
ZK2-GEN
Type
AH-20
AH-25
AV8-25
K-ENMA
K-ENSA
KG10A
KG8
KH8
K-NA
20334-00001
Z-ARS180
ZF8-NMA
ZF10-NSA
ZF12-NSA
ZF15-NSA
ZF16-NSA
ZG-NMA
3
Werbung
