Werbung
Montageanleitung
LH24A60
Electrical installation
AC/DC 24 V, 3-point
–
+
0
1
2
3
1
1
0
0
1
0
Installation notes
!
Applications without transverse force
Applications with transverse forces
Dimensions [mm]
www.belimo.eu
Linear actuator, Open-close, 3-point, AC/DC 24 V, 150 N
Cable colours:
1 = black
2 = red
3 = white
Notes
• If a rotary support and/or coupling piece is used, losses in the actuation force
losses are to be expected.
The linear actuator is screwed directly to the housing at three points. Afterwards, the
head of the gear rod is fastened to the moving part of the ventilation application (e.g.
damper or slide valve).
Connect the coupling piece with the internal thread (Z-KS2) to the head of the gear
rod. Screw the rotary support (Z-DS1) to the ventilation application. Afterwards, the
linear actuator is screwed to the previously mounted rotary support with the enclosed
screw. Afterwards, the coupling piece, which is mounted to the head of the gear rod, is
attached to the moving part of the ventilating application (e.g. damper or slide valve).
The transverse forces can be compensated for to a certain limit with the rotary support
and/or coupling piece. The maximum permissible swivel angle of the rotary support
and coupling piece is 10°, laterally and upwards.
Dimensional drawings
Änderungen vorbehalten
2018-01-30
LH24A60 • en-gb • 2015-11-24 • subject to changes
l indab | Wi r v e re i nf ache n B au
RCW-2/RCWB-2
103
75
94
224.2
193.5
23
3
Werbung
