Declaration Of Incorporation - BAHR ELZI 30 Montageanleitung

ELZI
30, 40, 60

3. Declaration of Incorporation

3.1 Declaration of Incorporation
as defi ned by EC Machinery Directive 2006/42/EC, Appendix II, 1. B for incomplete machines.
The manufacturer
Bahr Modultechnik GmbH
Nord-Süd-Str. 10a
31711 Luhden - Germany
hereby confirms that the product:
Name:
SN/ID-No:
complies with the requirements regarding an incomplete machine according to EC Machinery Directive 2006/42/EC.
The following basic requirements of the Machinery Directive 2006/42/EC, Appendix I, have been applied and are
complied with: 1.1.5.; 1.3.2.; 1.3.4.; 6.1.1.
The following harmonizing standards have been applied (as applicable on the date of signature):
DIN EN ISO 12100 – 1 Safety of Machinery – Basic concepts, general principles for design
Part 1: Basic terminology, methodology
DIN EN ISO 12100 – 2 Safety of Machinery – Basic concepts, general principles for design
Part 2: Technical principles and specifications
Bahr Modultechnik GmbH undertakes to submit the technical documentation relating to the incomplete machine according
to Appendix VII B of the Directive 2006/42/EC to the relevant national authorities upon justified request
(in hard copy form).
Luhden / 24.09.2012
Location, date
This incomplete machine must not be put into operation until the machinery into which it is incorporated has been declared
to be in conformity with the EC Machinery Directive 2006/42/EC.
Luhden, 24.09.2012
Location, date
see marking on the system
see marking on the system
Technical documentation
Jennifer Martitz
Construction manager - Dirk Bahr
Montageanleitung / Maschinenrichtlinie
Installation Instructions
24.09.2012
Seite / Page 7