Inhaltsverzeichnis
Werbung
ELZI
30, 40, 60
2. General Notes
2.1 Notes on these Installation Instructions
These Installation Instructions only apply to the positioning system described here and are intended to be used as
documentation by the manufacturer of the final product into which this incomplete machine will be incorporated.
We explicitly point to the fact that the manufacturer of the final product has to prepare operating instructions for the end
user which contain all functions and safety notes with regard to the final product.
This also applies if the positioning system is integrated into a machine. In such case, the machine manufacturer is
responsible for the corresponding safety devices, inspections and for monitoring crushing or shearing points, if any,
as well as for the documentation.
These Installation Instructions will help you to
- avoid hazards,
- avoid downtimes, and
- to ensure or increase the life cycle of this product.
The warnings and safety precautions as well as other requirements mentioned in these Installation Instructions must be met
without exception.
Every person working with the product must read and observe these Installation Instructions.
The product may not be taken into operation unless it complies with the provisions of EC Directive 2006/42/EC
(Machinery Directive). The CE Marking directives must be complied with before marketing the product; this also applies
to the documentation.
We explicitly point to the fact that the secondary manufacturer who will integrate this incomplete machine/partial machine/
machine part into a final product is obliged to extend and complete this documentation correspondingly. In particular, if
electrical components and/or drives are integrated into the product, the secondary manufacturer has to set up a declaration
of conformity. Our Declaration of Incorporation will then automatically become invalid.
Montageanleitung / Maschinenrichtlinie
Installation Instructions
24.09.2012
Seite / Page 6
Werbung
Inhaltsverzeichnis
