Inhaltsverzeichnis
Werbung
ELZI
30, 40, 60
1. Safety
1.2 Special Safety Precautions
- Any work with the positioning system must be carried out in compliance with the current instructions.
- The system may be opened by authorized skilled personnel only. In case of a defect we recommend contacting
the manufacturer or returning this positioning system for repair.
- Connecting the positioning system to an electric power system may be carried out by qualifi ed personnel only;
any local connection conditions and regulations (e. g. DIN, VDE) must be observed in this respect.
- The appropriate personal protection equipment (PPE) must be worn during all work.
- Unauthorized modifi cations of the positioning system are prohibited due to safety reasons.
- In case of a diagonal or vertical mounting position of the positioning system, the carriage must always be secured
against fall down (e. g. during mounting, dismantling, maintenance and repair work).
- The transverse forces, torques and speeds determined by Bahr Modultechnik GmbH for this positioning system
must not be exceeded.
- Following an impact, the toothed belt, the ball rail guide and the runner block must be exchanged - even if there
are no visible damages. For information regarding spare parts please see the spare parts list for the
corresponding type of positioning system.
- The rating plate must always be maintained in a legible condition. The data must be easily retrievable at any time.
- Danger zones are marked by danger symbols for your safety (see 1.3.1).
- Safety-relevant devices must be inspected with regard to their function, integrity and completeness at regular
intervals, at least once a year.
Montageanleitung / Maschinenrichtlinie
Installation Instructions
24.09.2012
Seite / Page 4
Werbung
Inhaltsverzeichnis
