Performing The Pressing Operation; Cleaning, Maintenance And Repair - NovoPress EFP203 Betriebsanleitung

EFP203
Pos : 36 /RVT/Inbetri ebnahme und Betrieb/Ver press en/01- Ü berschrift + Quets chgefahr ACO102, AC O152, ACO/EC O202, AVO202XL, EC O301, AFP/EF P202 @ 0\mod_1386247194505_18.doc x @ 1647 @ 2 @ 1

8.2 Performing the pressing operation

EN
Pos : 37 /RVT/Inbetri ebnahme und Betrieb/Ver press en/02c - Gefahrenbereic h EFP203 @ 1\mod_1437556366544_18.doc x @ 13383 @ @ 1
Pos : 38 /RVT/Inbetri ebnahme und Betrieb/Ver press en/04- BA beachten ACO102, ACO152, AC O/ECO202, AC O202XL, ECO301, AFP/EF P202 @ 0\mod_1386254189959_18.doc x @ 1665 @ @ 1
Pos : 39 /RVT/Inbetri ebnahme und Betrieb/Ver press en/05d - Punkt 1 +2 EF P203 @ 1\mod_1437573982559_18.doc x @ 13509 @ @ 1
1. Check whether the nominal width of the press fitting matches the nominal width of the press
jaw/press collar.
2. Comply with the system manufacturer's instructions when fitting the press jaw/press collar
(Fig. 6).
If using a press collar: Fit the adaptor jaw to the press collar as described in the press collar
manufacturer's instructions.
Pos : 40 /RVT/Inbetri ebnahme und Betrieb/Ver press en/07d - Info Pr ess bac ke EF P203 @ 1\mod_1437558264885_18.doc x @ 13404 @ @ 1
Pos : 41 /RVT/Inbetri ebnahme und Betrieb/Ver press en/08 - Info Pr esss chling e ACO/EC O202, ACO202XL, EC O301, AF P/EFP202 @ 0\mod_1386668854154_18.doc x @ 1706 @ @ 1
Pos : 42 /RVT/Inbetri ebnahme und Betrieb/Ver press en/09a - Punkt 3 AC O102, AC O152, ACO/ECO202, ACO202XL, AF P/EF P202 @ 0\mod_1386672196372_18.doc x @ 1712 @ @ 1
3. To start the process, press the start button.
Pos : 43 /RVT/Inbetri ebnahme und Betrieb/Ver press en/10e - Punkt 4 EFP203 @ 1\mod_1437558437432_18.doc x @ 13425 @ @ 1
4. When pressing is complete:
Pos : 44 /RVT/R einigung, Wartung, R eparatur /01c - Vorsicht -Ei nsc halter- EFP203 @ 1\mod_1437565115300_18.doc x @ 13467 @ 1 @ 1
9

Cleaning, maintenance and repair

Pos : 45 /RVT/Allgemeines /#### Seitenumbr uch #### @ 0\mod_1380200837280_0.doc x @ 885 @ @ 1
CAUTION!
Danger of crushing!
There is a risk that fingers and hands will be crushed.
Therefore:
– Keep body parts and foreign objects away from the press jaws during the pressing
operation.
– Do not hold the jaw levers with your hands during the pressing operation.
CAUTION!
Keep fingers away from the at-risk zone if no press jaw/adaptor jaw is
fitted. (Fig. 2)
Fingers risk being crushed.
Therefore:
– Do not operate the device without the jaws.
– Keep your fingers away from the at-risk zone.
Information!
Always comply with the operating instructions for the press tools!
Information!
Make sure that the press jaw is fully closed when pressing is complete (Fig. 7)
Information!
Ensure there is no gap between the segments of the press collar when the
pressing operation is complete.
• If using a press collar: First detach the adaptor jaw from the press collar, then
• Detach the press jaw/press collar from the press fitting (Fig. 8).
CAUTION!
Risk of injury during cleaning or repair work from inadvertently pressing
the On switch.
Therefore:
– Comply with the safety instructions and always disconnect the mains plug before
performing cleaning, maintenance or repair work.
14