Disposal Of The Machine; Recommended Spares; Wiring Diagrams - Nilfisk-ALTO ATTIX 130 Betriebsanleitung

- unscrew the two screws "C" and remove separator
from the container.
- Replace the part if excessively worn.
- Assemble separator "D" again.
- Lock it in position by screwing the two screws "C".
- Refit the filter and close head "B", locking it in place
with the two fastening latches "A".

- Disposal of the machine

Dispose of the machine in compliance with the current
laws in force.
- Correct Disposal of This Product (Waste Electrical &
Electronic Equipment) (Applicable in the European
Union and other European countries with separate
collection systems)
This marking (pos. N - fig. 1) shown on the product or
its literature, indicates that it should not be disposed
with other household wastes at the end of its working
life. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, please
separate this from other types of wastes and recycle

- Recommended spares

The following is a list of spare parts that should be kept ready to hand in order to speed up maintenance work. (fig.
19).
Recommended spare parts list (fig. 19)
Pos. Description
1 Star-shaped filter "L "
2 Star-shaped filter "M"
3 Filter ring
4 1000 W single-phase motor
5 Filter ring seal
6 Filter clamp
7 Absolute filter "H"
8 Box / Cover
07/2008
it responsibly to promote the sustainable reuse of
material resources. Household users should contact
either the retailer where they purchased this product,
or their local government office, for details of where and
how they can take this item for environmentally safe
recycling. Business users should contact their supplier
and check the terms and conditions of the purchase
contract. This product should not be mixed with other
commercial wastes for disposal.

- Wiring diagrams

See fig. 18.
Wiring diagram key
Abbrev.
J1
P1
S1 - S2 - S3 Motors switches
H1
H2
XC1
Model
ATTIX 130
ATTIX 130 L
ATTIX 130 M
ATTIX 130
ATTIX 130 L, M, H
ATTIX 130
ATTIX 130 L, M, H
ATTIX 130
ATTIX 130 L, M, H
ATTIX 130 H
ATTIX 130 L, M, H
11
Component
Antidisturb filter
Pressure switch
Filter blocked warning
light
Presence tension war-
ning light
Plug 16 A
Dim. Code number
Ø 460 17080
Ø 460 17245
Ø 460 15003
54002
Ø 460 17026
Ø 460 18079
Ø 410 17455
Ø 460 8 30202 + 8 31365
ATTIX 130
Code
8 39533
8 40403
8 39525
8 39530
8 39526
8 39527
GB
C319