Product Name; Emc Requirements Of Ec Directive; Laser Safety - Canon imagePRESS C10000VP Kurzanleitung

Product Name

Safety regulations require the product's name to be registered. In some regions where this product is sold, the following name(s) in
parenthesis may be registered instead.
imagePRESS C10000VP/C8000VP (F164400)

EMC requirements of EC Directive

This equipment conforms with the essential EMC requirements of EC Directive. We declare that this product conforms with the EMC
requirements of EC Directive at nominal mains input 400 V, 50 Hz although the rated input of the product is 380 to 415 V, 50/60 Hz.
Use of shielded cable is necessary to comply with the technical EMC requirements of EC Directive.
•
Equipment complying with IEC 61000-3-12
WARNING
This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be
required to take adequate measures.

Laser Safety

This product is confirmed as a Class 1 laser product in IEC60825-1:2014 and EN60825-1:2014.
CLASS 1 LASER PRODUCT
LASER KLASSE 1
APPAREIL À LASER DE CLASSE 1
APPARECCHIO LASER DI CLASSE 1
PRODUCTO LÁSER DE CLASE 1
APARELHO A LASER DE CLASSE 1
LUOKAN 1 LASER-TUOTE
LASERPRODUKT KLASS 1
The laser beam can be harmful to human bodies. Since radiation
emitted inside the product is completely confined within
protective housings and external covers, the laser beam cannot
escape from the machine during any phase of user operation.
Read the following remarks and instructions for safety.
•
Never open covers other than those instructed in the manuals
for this machine.
•
If the laser beam should escape and enter your eyes, exposure
may cause damage to your eyes.
•
Use of controls, adjustments, or performance of procedures
other than those specified in this manual may result in
hazardous radiation exposure.
58