Using The [Phones/Output] Jack; Using The [Sustain Pedal] Jack; Using The Midi Connectors - Yamaha P-60 Bedienungsanleitung

Using the [PHONES/OUTPUT] jack

Connect a pair of headphones here.
When a pair of headphones is connected to this jack, the P-60's internal
speakers will turn off automatically. This is helpful for private practice or
late night playing.
Though the P-60 is equipped with a built-in speaker system, you can also
play it through an external amplifier/speaker system. First, make sure the
P-60 and any external devices are turned off. Then, connect one end of a
stereo audio cable to the LINE IN or AUX IN jack(s) of the other device
and the other end to the rear panel
CAUTION
Do not use the P-60 at a high volume level for a long period of time, or
your hearing may be damaged.
CAUTION
Connect the P-60 to external equipment only after turning off power for
all devices.
Failure to observe these cautions may result in electric shock or equipment damage.
To prevent damage to the speakers, set the volume of the external devices at the minimum setting before connecting
them.

Using the [SUSTAIN PEDAL] jack

This jack is for connecting a supplied foot switch or an optional
foot pedal to the P-60.
When you press the foot switch or the foot pedal, the notes you
play have a longer sustain.
The supplied foot switch is an on/off switch for sustain.
For the optional foot pedal FC3, the further down the pedal is
pressed, the longer the sound will be sustained (can be used like
a half pedal effect).
NOTE Connect or disconnect the foot switch or the foot pedal
when the power is off.
NOTE Do not turn on the power to the unit while pressing the
foot switch or foot pedal. Otherwise, the switch or
pedal polarity (on/off) will be reversed.

Using the MIDI connectors

The MIDI IN connector receives MIDI data from an external MIDI device (such as a
MIDI sequencer) which can be used to control the P-60. The MIDI OUT connector
transmits MIDI data generated by the P-60 (e.g. note and velocity data produced by
playing the P-60 keyboard).
More details on MIDI are given in "About MIDI" on page 22.
jack on the P-60.
[PHONES/OUTPUT]
Standard stereo
phone plug
PHONES/
OUTPUT STANDBY /
IN MIDI
PHONES/
DC IN 12V
OUTPUT STANDBY / ON
IN MIDI OUT SUSTAIN PEDAL
IN
Before Using the P-60
P-60
ON DC IN 12V
OUT SUSTAIN PEDAL
MIDI OUT
11