Specifications; General Safety Rules - Makita BJV140 Betriebsanleitung

ENGLISH
1 Red part
2 Button
3 Battery cartridge
4 Cutting action changing lever
5 Lock-off button
6 Switch trigger
7 Tool opener
8 Blade clamp
9 Jig saw blade
10 Protrusions
11 Base
12 Hex wrench

SPECIFICATIONS

Model
Length of stroke
Max. Cutting capacities
Strokes per minute (min
Overall length
Net weight
Rated voltage
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for the sawing of wood, plastic and
metal materials. As a result of the extensive accessory
and saw blade program, the tool can be used for many
purposes and is very well suited for curved or circular
cuts.

GENERAL SAFETY RULES

WARNING! Read all instructions. Failure to follow all
instructions listed below may result in electric shock, fire
and/or serious injury. The term "power tool" in all of the
warnings listed below refers to your mains-operated
(corded) power tool or battery-operated (cordless) power
tool.
SAVE THESE INSTRUCTIONS.
Work area safety
1. Keep work area clean and well lit. Cluttered and
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while oper-
ating a power tool. Distractions can cause you to
lose control.
Explanation of general view
13 Cover plate
14 Anti-splintering device
15 Dust nozzle
16 Hose for vacuum cleaner
17 Cutting line
18 Bolt
19 Bevel slot
20 Graduations
21 V-notch
22 Gear housing
23 Starting hole
24 Rip fence
Wood
Mild steel
Aluminum
-1
)
GEA002-3
25 Fence guide
26 Threaded knob
27 Circular guide pin
28 Rule bar
29 Guide rail adapter
30 Guide rail
31 Screw
32 Limit mark
33 Brush holder cap
34 Screwdriver
BJV140
26 mm
135 mm
10 mm
20 mm
0 – 2,600
255 mm
2.7 kg
D.C. 14.4 V
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
8. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of
electric shock.
Personal safety
9. Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
BJV180
26 mm
135 mm
10 mm
20 mm
0 – 2,600
257 mm
2.8 kg
D.C. 18 V
7