Warranty Conditions; Safety Measures - avidsen 642278 Installations- Und Bedienungsanleitung

WARRANTY CONDITIONS:

The warranty does not cover consumables (batteries, etc.) or damage caused by misuse, improper installation,
external intervention, damage due to physical or electrical shocks, dropping or weather-related phenomena.
• Do not open the device as doing so will void the warranty.
• If returning the product for after-sales service, protect the screen to prevent scratches.
• Clean with a soft cloth only, no solvents. The warranty is void if parts have been dismantled. Clean the outside with
a soft dry cloth only. Before cleaning, disconnect the equipment or switch it off at the mains.
Note: Do not use any carboxylic acid, alcohol, or similar chemicals on the product. In addition to damaging
your device, the fumes are also hazardous to your health and are explosive.
Do not use any tool that can conduct voltage (wire brush, sharp tool, etc.) for cleaning.
The receipt or invoice is proof of purchase date.

10. SAFETY MEASURES

Damage caused by failing to adhere to the manual nullifies the warranty. We will not accept liability for damage
resulting from non-compliance!
We will not accept liability for any harm to goods or people caused by improper handling or failure to adhere to
safety instructions.
This product was manufactured in total compliance with safety guidelines. In order to maintain this status and
provide for the best possible conditions of usage, the user must adhere to the safety instructions and warnings in
this manual.
The user of this system is responsible for it and must verify that the video surveillance is in compliance with
applicable laws in their country of usage.
: This symbol indicates a risk of electrical shock or short-circuiting.
- Only use this product with electrical current in the following ranges: 100-240 volts and 50-60 hertz. Never try to
use this device with an electrical current outside of these ranges.
- Verify that all of the electrical connections of the system are consistent with the usage instructions.
- In commercial establishments, be sure to adhere to accident prevention rules for electrical installations.
- For schools, training equipment, workshops, etc., the presence of qualified personnel is needed to monitor
operation of the electronic devices.
- Adhere to the usage instructions for other devices connected to the system.
- Contact a person with experience if you are unsure about how to operate the system or about the safety of
devices.
- Never plug in or unplug electrical devices with wet hands.
- When installing this product, verify that the power wires are not at risk of being damaged.
- Never replace damaged electrical wires yourself! If an electrical wire is damaged, remove it and ask for help from
a person with experience.
- The electrical socket must be close to the device and must be easily accessible.
WARNING
Let the user know about 'dangerous voltage' without insulation inside the casing of the product.
The voltage is strong enough to pose a risk of electrocution.
This product has a two-year warranty for parts and labour in our workshops.
Let the user know about important instructions for usage and maintenance (includ-
ing repair) in the documents accompanying the device.
642278 - V1
EN6