Safety Instructions; Description; Component Names; Monitor - avidsen 642278 Installations- Und Bedienungsanleitung

1. SAFETY INSTRUCTIONS

Important!
• Please carefully read the user manual before installing or using this product.
• If you are installing this product for someone else, remember to leave the manual or a copy of it with the end
user.
Warning:
• The various items should only be disassembled by an authorised technician.
Safety measures:
• For operation of this system in complete safety, it is essential that the installers, users, and technicians follow all of
the safety procedures described in this manual.
• Specific warnings and warning symbols are given for items if necessary.

2. DESCRIPTION

1 •

Monitor

2 • Wall bracket
3 • Adapter plug
General
This videophone is composed of an interior response station with a screen and an exterior panel with an intercom
and camera, allowing the person inside to see and communicate with the visitor outside who rings the doorbell. The
system is easy to install, with only two wires needed for all functions: the doorbell, the video feed, the intercom, and
the strike plate and automated opening controls. For effective usage, please carefully read this instruction manual.

3. COMPONENT NAMES

a. Monitor
(fig. 2)
1. 4" (11 cm) colour screen.
2. Press < 1s: view intercom panel camera.
Press for 5s: access menu.
Press left arrow on menu screen
3. Answer a call and talk to visitor.
Press right arrow on menu screen
4. Open electric strike plate.
Press down arrow on menu screen
5. Open gate (dry contact)
6. Microphone to communicate with the intercom panel.
7. Doorbell volume setting.
8. On the back of the monitor, a socket for the 17V
ment in compliance with standards in force: NFC 15-100 for France).
9. Terminal block for the wires to connect to the intercom panel.
10. Loudspeaker.
b. Intercom panel, exterior camera
1. Microphone: allows the visitor to communicate with the person inside.
2. IR LED: enables visibility in the dark (light not visible to the naked eye).
3. CMOS camera lens.
4. Call button: when a person presses this button, the name holder lights up and the doorbell rings inside. The
screen and the camera turn on.
5. Speaker: allows the person inside to be heard outside.
6. Terminal block for the wires to connect to the monitor.
7. Name holder. To change the label in the holder, carefully lift the plastic protector (7) with a small screwdriver
and slide out the label in the holder. The name holder lights up in the dark.
(fig. 1)
4 • Intercom panel
5 • Weather-proof shield
adapter plug (adapter to be connected with installed equip-
(fig. 3)
642278 - V1
EN2