Instruction Manual - GRAPHITE 58G119 Betriebsanleitung

CAUTION: BEFORE USING THE POWERTOOL READ THIS MANUAL CAREFULLY AND KEEP IT FOR FUTURE
REFERENCE.
● Use ear protectors when operating the drill.
● Use additional handles supplied with the tool.
ADDITIONAL RULES FOR SAFE OPERATION OF DRILL
● Use only recommended battery and charger.
● Keep the battery away from heat sources. Do not leave the battery for a long time in high temperature (in direct sunlight,
in proximity of heaters and wherever the temperature exceeds 50°C).
● The battery charging time cannot be longer than 8 hours, otherwise the battery may be damaged.
● Avoid charging the battery in temperatures lower than 0°C.
● Charger supplied with the drill is designed for operation with this product only. Do not use it for other purposes.
● Do not put any metal objects into the charger.
● Do not change direction of spindle rotation when the tool is operating. Otherwise drill may be damaged.
● To clean the drill use soft, dry cloth. Never use detergents or alcohol.
● Disconnect charger from power supply before cleaning.
● If you plan to charge more than one battery successively, make a 30 minute break between chargings.
SPECIAL CONDITIONS REGARDING SAFETY OF CHARGER OPERATION
● Keep this manual. It contains important safety rules and rules for charger use.
● Before using the charger read all relevant information contained within this manual, see markings on the charger and
the product it is designed for.
● To reduce the risk of potential personal injury use the charger for nickel-cadmium batteries only. Other type batteries
may explode and cause personal injury or material damages.
● Do not expose the charger to moisture or water.
● Use of any connecting elements not supplied or not recommended by the manufacturer of the charger may cause fire,
personal injury or electric shock.
● Make sure the power cord is not located in pathway, it is not exposed to treading or other danger (e.g. strong tension).
● Do not use extension cord unless it is absolutely necessary. Use of improper extension cord may cause fire or electric
shock. If it is necessary to use extension cord, first make sure that:
- Extension cord socket matches plug prongs of the original charger power cord.
- Extension cord is in good technical condition.
● Do not use the charger with damaged cord or plug. Damage should be repaired by a qualified person.
● Do not use the charger after it has been hit, dropped or otherwise damaged. Entrust the testing and potential repair to
authorized service workshop.
● Do not try to dismantle the charger. All repairs are to be made by an authorized service workshop. Improper charger
assembly may cause electric shock or fire.
● Disconnect the charger from a power supply before starting any maintenance or cleaning.
Disconnect the charger from mains network when it is not in use.
CONSTRUCTION AND USE
Drill is a battery-powered tool. Drive consists of DC commutator motor with permanent magnets and planetary gear.
Drill is designed for screwing in and out screws and bolts in wood, metal, plastics and ceramics, and for drilling holes in
these materials. Cordless, battery-powered power tools are especially useful for works in interior furnishing, adaptation of
premises etc.

INSTRUCTION MANUAL

CORDLESS DRILL
58G119
DETAILED SAFETY REGULATIONS
Noise hazards may cause hearing loss.
Loss of control may cause operator personal injury.
13