Sony SU-WL850 Installationsinformationen Seite 17

Note
 We recommend you to check the
position of TV in the viewing
environment.
2
Align to the wall and
WM1
make four marks.
WM1
Note
 Use a level to check whether
WM1
is level.
− 17 (GB) −
3
Drill pilot holes on the marks.
4
5
Install on the wall using
WM1
suitable screws (not supplied)
and washers (not supplied).
Note
 Use a level to check whether the Wall-Mount Bracket
is level.
Precaution
 Do not over-tighten wooden screw 8 mm × 60 mm.
Improper tightening could reduce the holding power
of wooden screw 8 mm × 60 mm.
75 mm
10 mm
8 mm × 60 mm
GB