Setting The Desired Room Temperature - Austro Flamm Clou Pellet Bedienungsanleitung

24

Setting the desired ROOM TEMPERATURE

TEMPERATURE SETTING MODE / Example DESIRED TEMPERATURE +40 °C
You are allowed to set the DESIRED
ROOM TEMPERATURE at any time
between 0 °C – 40 °C. To set or chan-
ge the Temperature you have to switch
from PERFORMANCE MODE (Bright
White LIGHTNING DISPLAY) to TEM-
PERATURE SETTING MODE (MAGEN-
TA LIGHTNING DISPLAY). Therefore
move the TURNING KNOB speedy
counterclockwise till the 3:00 o`clock
position and back clockwise to the
9:00 o´clock position. Now you do have
a Range between 0 °C – 40 °C to set
your desired ROOM TEMPERATURE.
OPERATING MANUAL
The pictures on the next page do show
you how you have to set the TURNING
KNOB to get your desired room tem-
perature (On the inside of the Hopper
LID we have placed a sticker that does
show you also the SETTING RANGE for
the DESIRED ROOM TEMPERATURE!).
Be aware: After any setting of a desi-
red temperature value, the lights start
blinking. Herewith the controller does
inform that your Temperature setting is
accepted.
ENGLISH