Adjusting The Desired Heating Performance - Austro Flamm Clou Pellet Bedienungsanleitung

22

Adjusting the desired HEATING PERFORMANCE

After the START UP the display does show: Lighted Performance area, permanently green Flame.
The Lightnig Display does have 5 seg-
ments. Depending on the set perfor-
mance stage 1 – 5 segments are light-
ning bright white (As more segements
are lightning as stronger the HEATING
PERFORMANCE). The desired HEA-
TING PERFORMACE can be set im-
mediatly after the START. To set the
desired HEATING PERFORMANCE you
have to move the TURNING KNOB af-
OPERATING MANUAL
ter the START ADVICE counterclockwi-
se to the position of the desired stage
(See Pictures on the next page). 5 se-
conds after you have done a new set-
ting with the TURNING KNOB the dis-
play will start to blink for several times
and then keep on lighten permanent.
With the blinking the controller confirms
that your new advice is accepted.
ENGLISH