The Most Important - Austro Flamm A70/50 Benutzerhandbuch

Kaminkassette A70/50 / A70/60
Heating in between seasons
Heating the cassette fire in between seasons,
when the outside temperatures are higher, the flue
gases cannot escape completely and this may lead
to disturbances in the chimney draught, especially
if the temperatures are rising suddenly. The
cassette fire has to be charged with less wood and
the primary air has to be increased so that the
wood can burn down faster (with visible flames)
and thus the chimney flue can stabilize.
4. THE MOST IMPORTANT SPARES—OVERVIEW
Gaskets
Description
Flat gasket 12 x 6 mm
Round glas fibre gasket 14 mm
Keramott
Description
Bottom Keramott left
Bottom Keramott right
Rear left, Keramott
Rear right Keramott
lateral Kermott left
lateral Keramott right
Keramott wood retainer
Grate
Other parts
Description
door glass
door bolt
door handle
BA1 spring
Cassette fire lacquer
Wood/coal igniter
Glass cleaner ½ litre
IMPORTANT:
Have defective parts replaced by your certified dealer only. This will guarantee that
your cassette fire functions properly and safely.
Convection air
The cassette fire A70/50 / A70/60 is equipped with two fans controlled by a thermostat. After approx. 20
minutes of operation the fans will switch on automatically, if the necessary temperature has been
reached. When the fire has gone out and the cassette fire cools down, the fans will automatically switch
off again as soon as the required temperature is reached.
Maintenance
Please use a specialized product such as our Thermohit glass cleaner for cleaning the glass. Lacquered
surfaces are to be cleaned only with a cloth (may be damp).
Cleaning
The cassette fire, flue outlets and smoke pipes should be cleaned and inspected for deposits every year –
if necessary more often, e.g. after the cleaning of the chimney. The chimney also has to be cleaned
regularly by the chimneysweeper. Your chimneysweeper will inform you of the necessary inspection
intervals. An expert should inspect the cassette fire annually.
Nr. drawing A70/50 A70/60
1 718021
2 714223
Nr. drawing A70/50 A70/60
3 715693
4 715694
5 715695 715761
6 715696 715762
7 715697 715760
8 715699 715763
9 715698
10 716408
Nr. drawing A70/50 A70/60
11 712715 715764
12 715722-92
13 715710-29
14 715778-15
650002
640067
640070
6
Chimney fire
Chimney fire may occur, due to sooting and
deposits in the chimney, if wrong or humid fuel are
used. Close all air inlets on the fireplace/chimney
immediately and call the fire brigade. Please have
an expert inspect your chimney for cracks and air-
tightness after the burning out of the chimney.
order of Keramott installation acc. to numbering!
english