Safety Measures - Vitek VT-4200 R Betriebsanweisung

ENGLISH
MULTICOOKER
Description
Multicooker body
1.
Display
2.
Control panel
3.
Bowl
4.
Multicooker lid
5.
Steam valve
6.
Protection screen
7.
Protection screen clamps
8.
Carrying handle
9.
Power cord connector
10.
Lid opening button
11.
Steam release opening
12.
Heating element
13.
Temperature sensor
14.
Soup ladle
15.
For additional protection it is reasonable to install a residual current device (RCD) with nominal
operation current not exceeding 30 mA. To install RCD contact a specialist.

SAFETY MEASURES

Before connecting and using the unit, read the instruction manual carefully. Follow all the warnings
and operating recommendations listed in this manual. Keep this manual for future reference.
•
Before using the unit, examine the power cord and the power cord connector closely and make
sure that they are not damaged. Do not use the unit if the power cord or the power cord connec-
tor are damaged.
•
Before switching on make sure that the voltage of the electric network corresponds to unit oper-
ating voltage.
• The power cord is equipped with "euro plug"; plug it into the socket with reliable grounding con-
tact.
•
Do not use adapters for plugging the unit in.
•
Make sure that the power cord is properly inserted into the corresponding connector of the mul-
ticooker and the socket.
• Use only the supplied power cord, do not use it with other units.
•
Use only removable parts supplied with the unit.
•
Place the unit on the flat heat-resistant surface away from water, moisture and open flame.
• Place the unit with free access to the mains socket.
• Install the unit in places with proper ventilation.
•
Do not expose the unit to direct sunlight.
•
Do not place the unit close to walls and furniture.
• Avoid contact of the power cord with hot and sharp subjects. Avoid damaging the isolation of the
power cord.
•
Do not touch the power cord or the power plug with wet hands.
•
Do not immerse the unit, the power cord and the power plug into water and other liquids.
• If the unit was dropped into water, unplug it immediately. Do not put your hands into water! Apply
to the authorized service center for the further use of the unit.
•
Do not insert foreign objects, including metal parts, such as pins or needles, into the openings
or other details of the unit.
•
Do not leave the operating unit unattended. Always unplug the unit when you do not use it.
VT-4200.indd 4
Measuring cup
16.
Spatula
17.
Power cord
18.
Basket for steam cooking
19.
Control panel
«Stop/Keep warm» button
20.
Keep warm function indicator
21.
«Rice» button
22.
«Delayed start» button
23.
Delayed start function indicator
24.
«Hours» button
25.
«Minutes» button
26.
«Menu» button
27.
«Quick cooking» button
28.
«Start» button
29.
On/operation indicator
30.
4
27.08.2012 12:38:37