Herunterladen Inhalt Inhalt Diese Seite drucken

Appendix E - Technical Specifications - Axis 2400 Administrationshandbuch

Inhaltsverzeichnis

Werbung

AXIS 2400/2401 Admin Manual

Appendix E - Technical Specifications

System Requirements -
protocols and can be used with most operating systems: Windows, Linux, UNIX, Mac and
several others. The only software required is Microsoft Internet Explorer 4.x/5.x or
Netscape 4.x.
Physical network connection using RJ-45 twisted pair cable. Installs directly
Installation -
to NTSC or PAL video cameras using BNC connectors. Use as a standalone system or as an
add-on to existing CCTV systems.
Management -
Remote configuration and status using Web-based tools.
Compression -
Motion-JPEG, as well as single snapshot JPEG images. User-controlled
compression level.
Video Features -
Time stamp and text overlay. Color control (B/W or color).
Video Inputs (AXIS 2400) -
Z termination and includes autosensing for NTSC and PAL.
Video Inputs (AXIS 2401) -
composite video connection with 75 Ohm/Hi Z termination.
Video Output (AXIS 2401) -
connector that allows direct connection of an external monitor.
Networking -
10baseT Ethernet or 100baseTX Fast Ethernet, TCP/IP, HTTP, FTP, SMTP, NTP,
ARP, BOOTP.
4 optical-isolated alarm inputs and 1 output relay (max 24V, 0.1 A) supplied
General I/O -
on a single terminal block connector. Programmable inputs for remote image storage via
File Transfer Protocol (FTP) or E-mail (SMTP), pre/post alarm image storage.
Pre/Post Alarm Buffer -
Serial Connectors -
Two 9-pin D-SUB RS-232, max 230 Kbps, 9-pin D-SUB RS-232 or
RS-485/422 max 38.4 Kbps, half-duplex.
Pan/Tilt/Zoom -
PTZ support for remote camera control. Please see www.axis.com for
information about supported devices.
Security -
Multi-user password protection.
Operating Conditions: -
The AXIS 2400/2401 uses the standard Internet TCP/IP suite of
supports up to four BNC composite video inputs with 75 Ohm/Hi
Supplied as an NTSC or PAL-specific unit, allowing a single BNC
A single video output (VIDEO OUT) terminated with a coax/BNC
Up to 4 MByte memory available for pre/post alarm image storage.
o
o
Temp: 40
to 125
o
o
F (5
to 50
C), Humidity: 20-80% RHG.
Technical Specifications
49

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

2401

Inhaltsverzeichnis