Appendix E - Technical Specifications - Axis 2400+ Administrationsanleitung

Technical Specifications
46

Appendix E - Technical Specifications

System Requirements -
protocols and can be used with most operating systems: Windows, Linux, UNIX, Mac. etc.
The only software required is Microsoft Internet Explorer 4.x/5.x or Netscape 4.x.
Installation - Physical network connection using RJ-45 twisted pair cable. Installs directly
to NTSC or PAL video cameras using BNC connectors. Use as a standalone system or as an
add-on to existing CCTV systems.
Management -
Motion-JPEG, as well as single snapshot JPEG images. User-controlled
Compression -
compression level.
Video Features -
Video Inputs (AXIS 2400+) -
Z termination and includes autosensing for NTSC and PAL.
Video Inputs (AXIS 2401+) -
composite video connection with 75 Ohm/Hi Z termination.
Video Output (AXIS 2401+) -
connector that allows direct connection of an external monitor.
Networking - 10baseT Ethernet or 100baseTX Fast Ethernet, TCP/IP, HTTP, FTP, SMTP,
NTP, ARP, BOOTP.
4 optical-isolated alarm inputs and 1 output relay (max 24V, 0.1 A) supplied
General I/O -
on a single terminal block connector. Programmable inputs for remote image storage via
File Transfer Protocol (FTP) or E-mail (SMTP), pre/post alarm image storage.
Pre/Post Alarm Buffer -
Serial Connectors
• COM-1 - RS-232, max 115 Kbps. Multiplexed with RS-485 port on the terminal block.
• COM-2 - RS-232, max 115 Kbps, half-duplex. A modem is connected here.
Pan/Tilt/Zoom -
information about supported devices.
Multi-user password protection.
Security -
The AXIS 2400+/2401+ uses the standard Internet TCP/IP suite of
Remote configuration and status using Web-based tools.
Time stamp and text overlay. Color control (B/W or color).
supports up to four BNC composite video inputs with 75 Ohm/Hi
Supplied as an NTSC or PAL-specific unit, allowing a single BNC
A single video output (VIDEO OUT) terminated with a coax/BNC
Up to 16 MB memory available for pre/post alarm image storage.
PTZ support for remote camera control. Please see www.axis.com for
AXIS 2400+/2401+ Admin Manual