Network Settings - Axis 2400 Administrationshandbuch

Configuring the Video Server
20
Emergency Actions
In certain circumstances it may become necessary to perform a Restart of the AXIS
2400/2401, or to return it to its Factory Default settings. Both of these actions can be
performed by clicking the appropriate button on this page. Please see Reinstating the
Factory Default Settings, on page 27, for details of how to reset to the factory default.

Network Settings

Click the Network icon to display, edit and refine the settings for:
• TCP/IP - used by the Video Server for transmitting data over the network.
• DNS (Domain Name System) - the Internet service used by the product for translating
domain names into IP addresses.
• SMTP (E-mail) - this is the protocol for sending e-mail messages between mail servers on the
network.
• Miscellaneous - set the network media and to restrict the bandwidth used by the product.
Configure the Network Settings with reference to the on-line help and the table below:
TCP/IP Parameters
DHCP
BOOTP
IP address
Default Router
Subnet Mask
Host Name
DNS Parameters
Domain Name
Primary DNS
Secondary DNS
SMTP Parameters
Primary Mail Server
Secondary Mail Server
Return Address
Miscellaneous
Select Media
Max Bandwidth
HTTP Port Number
Description
Enable DHCP to allow centralized assignation of IP addresses. Requires a DHCP server on the network.
Enable the BOOTP protocol for setting the IP address automatically. For further information on using
BOOTP, see Other IP Setup Methods, on page 38. If you intend to use the AXIS IP Installer, BOOTP must be
enabled.
Specifies the unique 32-bit IP address of your unit.
Specifies the network router your video server will use.
If unsure what value to use, contact your system administrator.
If you are using a DNS server on your network (see below), this is usually the same as the assigned DNS
Name.
Description
Enter the name of the domain your AXIS 2400/2401 belongs to.
Defines the IP address of the primary DNS server. This is used for identifying a computer by name instead
of IP address.
The IP address of the secondary DNS server. This will be used if the primary DNS server is unavailable.
Description
Defines the server that provides your mail facilities.
Defines a secondary server that can provide mail facilities in the event of the primary server being
unavailable.
The reply address for e-mails sent by the AXIS 2400/2401; that is, the name that will appear in the 'From'
field of the dispatched e-mail.
Description
This does not normally need to be changed, but if you have specific needs - due to the use of network
switches or similar equipment, select the type of network media here.
With the default set to unlimited, this parameter defines a restriction on the network bandwidth used by
the video server; particularly useful for a connection to a busy network.
This does not normally need to be changed, but may be, if you have particular requirements.
AXIS 2400/2401 Admin Manual