Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning And Care; Storage - Silvercrest SSME 250 A2 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für SSME 250 A2:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Cleaning and care

DANGER!
RISK OF ELECTRICAL SHOCK!
Before cleaning the appliance, disconnect
the power plug from the mains power socket!
There is a risk of electric shock!
NEVER immerse the base 5 in water or
other fluids!
It is best to clean the appliance directly after
use . This makes food residues easier to remove .
CAUTION! MATERIAL DAMAGE!
Do not use abrasive or aggressive cleaning
materials . These can damage the surface of
the appliance!
Wipe the base 5 with a damp cloth . For
stubborn soiling use a mild detergent on the
cloth . Wipe off any detergent residue using a
cloth moistened with clean water .
Pull the sealing ring out of the blade holder 4 .
If necessary, use a narrow, blunt object to help
you . Clean the lids 2/8, the blender jugs 1/
9, the blade holder 4 with blade 3 and the
sealing ring in warm water with a mild
detergent . Afterwards, rinse all parts with fresh
water to remove all traces of detergent .
NOTE
You can also clean the lids 2/8, the
blender jugs 1/9, the blade holder 4
with blade 3 and the sealing ring in
your dishwasher . If possible, place the parts in
the upper basket and ensure that none of the
parts can get stuck . Otherwise they might
deform .
SSME 250 A2
NOTE
If you clean the appliance directly after use, you
can usually achieve sufficiently hygienic cleaning
results for the blender jug 1/9 and the blade
holder 4 by using the following alternatives:
Large blender jug 1: Fill the large blender jug
1 with about 500 ml of water and add a few
drops of mild detergent .
Small blender jug 9: Fill the small blender jug
9 with about 200 ml of water and add a few
drops of mild detergent .
Attach the blade holder 4 and screw both
onto the base 5 .
Activate the "Pulse" function a few times so
that the blade 3 churns through the water .
Afterwards, rinse the blender jug 1/9 and
the blade holder 4 with plenty of clear water
to remove all detergent residues .
After cleaning, dry all parts thoroughly .

Storage

Store the cleaned appliance in a clean, dust-free
and dry place .
You can coil up the cable and fasten it using the
supplied cable clip 7 .
GB │ IE │ NI │ CY
 7

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis