Product Specifications; Charging The Battery - Bosch GBH 36 V-LI Professional Bedienungsanleitung

gbh36v_bu_1619929686_t.fm Seite 3 Freitag, 17. März 2006 10:14 10

Product Specifications

Rotary Hammer
Article number
Speed control
Rotation stop
Right/Left rotation
Quick change drill chuck
Rated input power
Power output
Impact rate at nominal rotational speed
Impact energy per stroke
Nominal speed
Right rotation
Left rotation
SDS-plus tool holder
Spindle collar diameter
Maximum drill diameter:
Masonry (core drill)
Concrete
Wood
Steel
Weight in accordance with EPTA-Procedure 01/2003
Please refer to the article number on the nameplate of your machine since the trade designation of individual
machines can vary.
3 OPERATING INSTRUCTIONS

Charging the Battery

Use only the charging unit listed on the accesso-
ries page. Only this charging unit is matched to the
lithium-ion battery used in the power tool.
The battery is equipped with temperature monitoring
that allows charging only in the temperature range be-
tween 0 °C and 45 °C. In this manner, a high battery
service life is achieved.
The battery is delivered with a partial charge. Before
using the power tool for the first time, fully charge the
battery. Independent of the charged state, the lithium
ion battery can be charged at anytime without short-
ening its service life (no memory effect). Interrupting
the charging procedure will not cause damage to the
battery.
1 619 929 686 • (06.03) T
GBH 36 V-LI
PROFESSIONAL
3 611 J00 R..
[W]
[W]
[per min] 0 ... 4260
[J]
[RPM]
[RPM]
[mm]
[mm]
[mm]
[mm]
[mm]
[kg]
The lithium-ion battery is protected against deep dis-
charging when used in the power tool. When the bat-
tery is discharged, the power tool is switched off by a
protective circuit and the tool no longer operates.
Do not continue to press the on/off switch after
an automatic switch off of the power tool. The
battery can be damaged.
Removing the Battery
The battery 16 has two locking steps that prevent the
battery from falling out when the battery unlocking but-
ton 11 is unintentionally pressed. When the recharge-
able battery is inserted into the tool, it is held in place
by a spring.
English–3
GBH 36 VF-LI
PROFESSIONAL
3 611 J01 R..
q
q
q
–
600 600
430 430
0 ... 4260
3.0 3.0
0 ... 960 0 ... 960
0 ... 930 0 ... 930
q
50 50
68 68
26 26
30 30
13 13
4.3 4.5
q
q
q
q
q